Total Tools 1100W Water Pump 1

Total Tools 1100W Water Pump 1

The Total Tools 1100W Water Pump 1 is a self-priming jet water pump designed for suitable water supply, transfer, and pressure-boosting applications. This 1.5 HP pump is an option for households, farms, workshops, and other properties that need a suitable water pumping solution.

The matching TOTAL TWP311006 model is listed by the manufacturer with a rated power of 1100W (1.5 HP). Its published specifications include a 220–240V AC, 50Hz supply, maximum head of 60 metres, maximum flow of 70 litres per minute, and maximum suction of 9 metres. Confirm that your product is model TWP311006 before relying on these specifications.

Available through Pejam Tools Kenya, this pump is worth considering when you need a self-priming jet pump for a compatible installation. Always check the required flow, delivery height, pipe connections, and installation conditions before ordering.

Why Choose the Total Tools 1100W Water Pump 1?

The Total Tools 1100W Water Pump 1 combines a 1100W power rating with a self-priming jet pump design. When correctly installed and used within its operating limits, a pump of this type can support suitable water transfer and supply systems.

Powerful 1100W motor

The stated 1100W (1.5 HP) rating gives you a useful starting point when comparing pumps for your water supply requirements. Ensure that your electrical installation provides the voltage and frequency specified by the manufacturer.

Self-priming jet pump design

A self-priming jet pump is designed to assist with drawing water from a suitable source after the required initial priming procedure. Self-priming does not mean that every pump can run dry or operate without following its priming instructions.

Useful published performance ratings

For the matching TWP311006 model, the manufacturer lists a maximum head of 60m and maximum flow of 70L/min. These are separate maximum ratings and should not be expected simultaneously in every installation. Actual delivery depends on the pump’s performance curve and the resistance of the connected pipework.

Suitable for selected water supply applications

Depending on the water source, installation, and system requirements, a compatible jet pump may be considered for domestic water supply, water transfer, and selected irrigation applications.

Applications of the Total Tools 1100W Water Pump 1

The Total Tools 1100W Water Pump 1 may suit several water-handling tasks when the required operating conditions fall within the manufacturer’s specifications.

• Household water supply: For suitable installations drawing water from an approved source and delivering it to the required outlets.
• Water transfer: For moving water between compatible tanks or storage systems, provided the required head and flow are achievable.
• Agricultural use: For selected irrigation and water supply tasks where the pump’s performance matches the system.
• Property maintenance: For appropriate water supply arrangements around homes and other premises.
• Workshop or commercial applications: For approved clean-water pumping tasks with suitable pipework and power supply.

These are general applications for this pump category. Check the exact model’s manual and the requirements of your installation before choosing it for a specific task.

Total Tools 1100W Water Pump 1: Key Specifications

For the matching model TWP311006, the manufacturer’s published information lists the following specifications:

• Brand: TOTAL
• Model: TWP311006
• Pump type: Self-priming jet water pump
• Rated power: 1100W (1.5 HP)
• Voltage: 220–240V AC
• Frequency: 50Hz
• Maximum head: 60m
• Maximum flow rate: 70L/min
• Maximum suction: 9m
• Pipe connection diameter: 1 inch × 1 inch
• Motor winding: Copper wire
• Impeller: Stainless steel
• Cable length: 0.3m, according to the manufacturer’s product listing

Specifications may vary between model variants or regional listings. Confirm the model number, supplied accessories, cable details, and current product documentation before purchase.

How to Select the Right Water Pump

1. Check the water source

Identify where the pump will draw water from, such as a suitable storage tank or well. Confirm that the water source and suction arrangement are compatible with the pump. The maximum suction rating is not a guarantee of performance in every installation.

2. Calculate the required delivery head

Consider the vertical height between the source and the delivery point, as well as losses caused by pipe length, elbows, valves, filters, and other fittings. A maximum head rating should not be treated as the height at which maximum flow will still be available.

3. Estimate the required flow rate

Determine how much water your application needs and when it needs it. Compare this requirement with the manufacturer’s pump curve. The published maximum flow of 70L/min represents a maximum rating, not a guaranteed flow at every delivery height or pressure.

4. Check the electrical supply

The matching model is listed for 220–240V AC at 50Hz. Ensure that your supply is compatible and that the circuit, earthing, protective devices, and installation meet applicable electrical requirements. A qualified electrician should check the installation where necessary.

5. Confirm pipe connections

The manufacturer’s listing specifies 1-inch inlet and outlet connections for the matching model. Check the thread type, fittings, pipework, and seals before installation. Confirm whether any additional fittings are needed.

For more technical information, consult the official TOTAL product listing for the TWP311006 water pump.

Installation and Maintenance Tips

Correct installation helps protect the pump and improve the reliability of the connected water system. Follow the supplied user manual for the exact model.

Prime the pump as instructed

Follow the manufacturer’s initial priming procedure before operation. Never assume that a self-priming pump can start dry or run without water. Dry running can damage pump components.

Use suitable pipework

Ensure that suction and delivery pipes are appropriately sized, securely connected, and free from avoidable restrictions. Check joints for air leaks, especially on the suction side, as these can interfere with pumping performance.

Protect the electrical installation

Install the pump in accordance with its instructions and local electrical requirements. Protect electrical connections from water, and disconnect power before inspection or maintenance. Do not operate the pump if cables, connections, or protective components are damaged.

Inspect performance regularly

Watch for unusual noise, vibration, leaks, overheating, or reduced water delivery. If performance changes, stop the pump when safe to do so and investigate the cause using the manufacturer’s troubleshooting guidance.

Keep the installation clean and serviceable

Inspect accessible connections, valves, and filters if fitted. Carry out maintenance at the intervals recommended by the manufacturer and use suitable replacement parts.

For additional background on pump selection, see the Grundfos guide to selecting and sizing a pump. The guide provides general selection information; the TOTAL manual remains the reference for operating this particular pump.

Frequently Asked Questions

Is the Total Tools 1100W Water Pump 1 self-priming?

The matching TOTAL TWP311006 is described by the manufacturer as a self-priming jet pump. Follow the required initial priming procedure and operating instructions.

What is its maximum flow rate?

The manufacturer lists a maximum flow of 70L/min for model TWP311006. Actual flow varies with delivery head and installation conditions.

What is the maximum delivery height?

The published maximum head for model TWP311006 is 60m. This is a maximum rating, not a promise of a particular flow rate at that height.

What electrical supply does it require?

The matching model is listed for 220–240V AC at 50Hz. Confirm the nameplate on the actual product before connecting it.

Can it be used for irrigation?

It may be suitable for selected irrigation systems if the required flow, pressure, water source, and installation fall within the manufacturer’s limits. Check the system requirements before purchase.

Does the pump include installation accessories?

Confirm the supplied accessories and fittings with Pejam Tools Kenya before ordering. Do not assume that additional pipes, valves, or connectors are included.

Buy the Total Tools 1100W Water Pump 1 from Pejam Tools Kenya

Choose your water pump based on the actual flow and head requirements of your installation, not just the motor power. If your product is the TOTAL TWP311006, check its published ratings and confirm the details on the product nameplate.

Visit Pejam Tools Kenya to explore our tools and equipment. Contact the team to confirm the model, current price, availability, and any installation requirements before placing your order.