Aico 3HP Compressor Head 1 – Powerful 3-Piston Air Compressor Head

The Aico 3HP Compressor Head 1 is a replacement compressor pump head option for compatible belt-driven air compressor systems. The product name identifies a 3HP application, a three-piston configuration, and a 65mm piston specification. Before ordering, confirm the exact model, mounting dimensions, pulley requirements, and operating specifications to ensure compatibility with your compressor.

A suitable compressor head is important for workshops, garages, and maintenance facilities that rely on compressed air for approved pneumatic tools and equipment. At Pejam Tools Kenya, we recommend matching the compressor head to the motor, receiver tank, drive system, and required operating pressure rather than selecting a replacement by appearance alone.

Why Choose the Aico 3HP Compressor Head 1?

The Aico 3HP Compressor Head 1 is intended for customers looking for a compressor head with a three-piston, 65mm configuration for a compatible air compressor system.

A three-piston head uses three piston assemblies to compress air. Its actual air delivery and operating performance depend on the pump design, rotational speed, motor, and system configuration. Confirm the manufacturer’s specifications before deciding whether it meets your workshop’s air demand.

Key considerations when choosing this compressor head

• 3HP application: Match the head to the motor power and operating requirements specified by the manufacturer.
• Three-piston configuration: Confirm that your compressor requires a three-piston head rather than a two-piston version.
• 65mm piston specification: Verify the piston diameter and model designation against the product documentation.
• Replacement suitability: Check mounting points, pulley alignment, drive-belt arrangement, and connection sizes.
• Workshop applications: Consider this type of compressor head for a compatible compressor used in garages, workshops, and maintenance environments.

These points describe the stated product configuration and general selection considerations. They do not guarantee a particular air delivery rate or maximum pressure without the correct technical data.

Applications of the Aico 3HP Compressor Head 1

A compatible compressor head may be used as part of a compressed-air system for applications such as:

• Automotive workshop equipment
• General mechanical workshop tasks
• Inflation equipment designed for compressed air
• Cleaning tasks using approved pneumatic equipment
• Maintenance and repair facilities
• Replacement or rebuilding of a compatible belt-driven air compressor

The compressor head alone does not provide a complete working compressed-air system. The motor, receiver tank, pressure switch, safety valve, pressure gauge, piping, and other components must be suitable for one another and correctly installed.

Always check the air demand of the tools you intend to operate. A compressor head that fits mechanically may still be unsuitable if its verified air delivery does not meet the application requirements.

Aico 3HP Compressor Head 1: What to Check Before Buying

1. Confirm the model and piston configuration

Check the identification label, existing compressor documentation, or supplier details. Confirm that the required head has three pistons and the correct 65mm piston specification.

The product name includes “3065mm,” which may refer to a 3065-style model designation rather than a physical 3065mm dimension. Confirm the correct model code with the supplier before publishing or ordering.

2. Match the motor power and operating speed

Check the motor’s rated power and the compressor head’s required rotational speed. The correct pulley sizes and drive ratio are important because excessive operating speed can damage the pump or create unsafe operating conditions.

Do not assume that every 3HP motor is suitable. Verify the manufacturer’s motor power, RPM, and pulley recommendations for the exact compressor head.

3. Verify air delivery and operating pressure

Ask the supplier for the pump’s air delivery, maximum operating pressure, and recommended operating speed. Air delivery may be stated in litres per minute (L/min) or cubic feet per minute (CFM).

Do not estimate air delivery solely from the number of pistons or piston diameter. Compare the manufacturer’s performance information with the air demand of your tools.

4. Check mounting and connection dimensions

Compare the mounting holes, base dimensions, outlet connection, pulley position, and drive-belt arrangement with your existing compressor. Check whether the required gaskets, filters, fittings, pulley, and other accessories are included.

Confirm these details before ordering to reduce the risk of receiving a head that cannot be installed on your compressor.

5. Check the lubrication and cooling requirements

Some compressor heads require oil lubrication and specific maintenance procedures. Confirm the correct lubricant, oil capacity, inspection interval, and cooling requirements from the manufacturer’s instructions.

Never operate the head without the required lubrication or outside its specified speed and pressure limits.

Installation and Maintenance of the Aico 3HP Compressor Head 1

A compressor head is a mechanical component that must be installed and operated as part of a properly configured compressed-air system. Installation should be carried out by a qualified technician familiar with air compressors.

Inspect the existing compressor

Before replacing a compressor head, inspect the motor, mounting base, receiver tank, pressure switch, safety valve, pressure gauge, pipes, and drive components. Confirm that the existing system is in serviceable condition and suitable for the replacement head.

Align the pulley and belt

Incorrect pulley alignment or belt tension can cause excessive wear, vibration, and mechanical failure. Use the specified pulley sizes and belt tension, and fit all guards before operating the compressor.

Follow the lubrication instructions

If the head requires oil, use the recommended lubricant and maintain the correct level. Check for leaks and follow the manufacturer’s service schedule. Do not assume that all compressor heads use the same oil or lubrication system.

Inspect safety components

The receiver tank and pressure-control equipment must be suitable for the compressor’s specified operating pressure. Ensure that the pressure switch and safety valve are correctly rated and functional. Never disable a safety valve or exceed the rated pressure of any component.

Carry out routine maintenance

Inspect the air filter, belts, fasteners, lubrication system, and accessible connections according to the manufacturer’s instructions. Stop the compressor, isolate the power, and safely release stored air pressure before carrying out maintenance.

For general safety information, consult the UK Health and Safety Executive’s guidance on work equipment. Use the compressor manufacturer’s instructions for model-specific installation, operating speed, pressure, and maintenance details.

Aico 3HP Compressor Head 1 Specifications

The product name provides a 3HP application, three-piston configuration, and 65mm piston specification. Confirm the following details for the exact Aico model before purchase.

• Brand: Aico
• Product type: Air compressor pump head
• Model / code: Confirm whether the exact model is designated 3065
• Piston configuration: 3 pistons, as stated in the product name
• Piston diameter: 65mm, as stated in the product name
• Motor power requirement: 3HP application; confirm manufacturer recommendation
• Air delivery: Confirm with supplier
• Maximum operating pressure: Confirm with supplier
• Required operating speed: Confirm with supplier
• Pulley size and drive arrangement: Confirm with supplier
• Mounting dimensions: Confirm with supplier
• Lubrication requirements: Confirm with supplier
• Included accessories: Confirm with supplier
• Price and availability: Confirm with Pejam Tools Kenya

These specifications should be checked against the actual product label and supplier documentation. Do not use specifications from a visually similar compressor head unless the model is confirmed to match.

Frequently Asked Questions

What does a three-piston compressor head do?

It uses three piston assemblies to compress air as part of a compatible air compressor system. Actual air delivery depends on the design and operating conditions.

Does this compressor head fit every 3HP air compressor?

No. Motor power alone does not determine compatibility. Mounting dimensions, pulley requirements, operating speed, piston configuration, and pressure rating must also match.

What does 65mm mean?

In the supplied product name, 65mm appears to identify the piston diameter. Confirm this interpretation with the supplier and product documentation before ordering.

Does the compressor head include a motor and air tank?

This product is described as a compressor head. Confirm the contents of the package with Pejam Tools Kenya; do not assume a motor, receiver tank, or accessories are included.

What information should I provide when requesting a replacement?

Provide your existing compressor model, motor power and speed, piston configuration, mounting dimensions, pulley details, and a clear photograph of the existing head.

Order the Aico 3HP Compressor Head 1 from Pejam Tools Kenya

Choosing a compatible compressor head helps you avoid installation problems and ensures the replacement can be assessed against your system’s operating requirements. The Aico 3HP Compressor Head 1 is an option to consider when you need a compatible three-piston, 65mm compressor head for a suitable 3HP application.

Visit Pejam Tools Kenya to explore tools, workshop equipment, and accessories. Contact the team to confirm the exact model, air delivery, operating pressure, mounting dimensions, and current availability before ordering.